Bruker manual PHILIPS MX3800D

[. . . ] DVD Digital Home Cinema System MX 3800D 1 pg 001-024/MX3800/22-Eng 1 4/23/02, 8:57 AM Important Note Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: Remove fuse cover and fuse. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. [. . . ] Setting the features 3 Press OK to confirm. Rating - NO PARENT If parental control is not activated, it will play all discs. Rating - 1 to 8 If the player's parental level is set below 8, only discs with a lower or equal level will play. For example, if the player is set to 5, only discs with ratings of 5, 4, 3, 2 and 1 will be played. Higher rated scenes will not be played unless an alternative that has the same rating or lower is available on the disc. For example, consider a disc that generally is suitable for most audiences, and it is rated at level 2 for the most part. However, in the middle, there are also scenes rated at 5 (not suitable for children). To play a higher rated disc or scene than the level set q Enter the 4-digit cord before resetting the rating level to a higher number (go to "Password"). Parental Enables setting of playback limitation level. Some DVDs may have a parental level assigned to the complete disc or to certain scenes on the disc. The rating levels are from 1 to 8 and are country dependent. You can prohibit the playing of certain discs that are not suitable for your children or have certain discs played with alternative scenes. If you forget the 4-digit code 1 Press four times when prompted for the password and the system will change back to the default password. 2 Go to "Password" and enter your new code. Note: Some DVDs are not encoded with a rating though the movie rating is printed on the disc jacket. The rating level feature does not work for such discs. Password To set a new password for the parental control or to change the password. The password supplied as default is 1234. Menu Language Select the language for on screen display. Defaults If RESET is selected, all the items in the setup menu will be reset to default setting. 1 Enter the 4-digit code. If necessary, enter the code a second time. PREPARATIONS 14 4/23/02, 9:00 AM pg 001-024/MX3800/22-Eng Basic Functions Selecting the surround sound mode IMPORTANT! For proper surround sound, make sure you have followed the "Connections" and "Preparations" procedures fully. The centre and surround speakers only operate when the system is set to surround sound mode and the source material being played is recorded or broadcast in Dolby Digital, DTS or Dolby Pro Logic surround sound. Stereo broadcasts or recordings will produce some surround channel effects when played in a surround mode. However, mono sources will not produce any sound from the surround speakers. q Press SURROUND to select surround or stereo mode. The availability of the various surround sound modes depend on the number of speakers used and the incoming sound information available on the disc. [. . . ] Cancel the parental control rating function or change the rating level. Moisture has condensed inside the system. Remove the disc and leave the system turned on for about an hour. . Disconnect the power plug from the outlet and insert again. Distorted or poor picture. Completely distorted picture or black/white picture. [. . . ]