Bruker manual PHILIPS FW2010

[. . . ] If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. Note: The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere. [. . . ] TM "TRACK" or "PROGRAM" will be displayed. TM The REPEAT, PROGRAM and SHUFFLE appear on the display. Note: ­ REPEAT DISC mode will be cancelled when shuffle is selected. pg 01-26/C55/22-Eng new 15 3/6/00, 11:43 AM 3139 116 19551 TUNER Storing Preset Stations MINI HIFI SYSTEM PROGRAM SHUFFLE REPEAT TIMER REC NEWS T. A. AM MW FM LW 60Hz 250Hz 500Hz 1KHz 2KHz 4KHz 8KHz STEREO BACK FRONT HSD STANDBY ON RDS CLOCK/ TIMER You can store up to 40 radio stations in the memory. When a preset radio station is selected, the preset number appears next to the frequency on the display. Automatic programming 1 Press TUNER (BAND). TM The PROGRAM starts flashing and "AUTO" will be displayed. TM The system will start searching for all radio stations with RDS and then followed by radio stations on FM, MW and LW band respectively. TM All available stations will be stored automatically. The frequency and preset number will be displayed briefly. TM The system will stop searching when all the available radio stations are stored or when the memory for 40 preset radio stations is used. TM The system will remain tuned to the last stored preset radio station. NEWS/TA CD1 · 2 · 3 CD PROG SEARCH · TUNING BAND TUNER STOP·CLEAR TAPE 1 · 2 TAPE PLAY PAUSE CDR/VIDEO AUX PRESET v A. By repeatedly pressing RDS button you can change the type of display information: TM The display shows in turn: STATION NAME TM PROGRAM TYPE TM RADIO TEXT TM TUNED FREQUENCY TM STATION NAME . . . Note: ­ When you press the RDS button and the display shows "NO RDS", it indicates that either the tuned station is not transmitting RDS signal or it is a non RDS station. RDS Clock Some RDS station may be transmitting a real clock time at an interval of every minute. Setting the time with RDS clock 1 Press CLOCK/TIMER. TM "--:--" or current time appears on the display. 2 Press CLOCK/TIMER once more to enter clock setting mode. TM "00:00" or current time starts flashing. TM The message "SEARCH RDS TIME" will be displayed. TM If the station does not transmit RDS clock, "NO RDS TIME" will be displayed. TM When the RDS clock is read, "RDS TIME" will be displayed. The current clock time is displayed for 2 seconds and will be stored automatically. TM If within 90 seconds, the RDS time is not detected, "NO RDS TIME" will be displayed. Note: ­ Some RDS station may be transmitting a real time clock at a minute interval. The accuracy of the transmitted time depends on the transmitting RDS station. NEWS/TA (Traffic Announcement) (only available in Radio Station with RDS) You can activate NEWS or TA function in Standby, Demonstration or any source mode except Tuner mode. [. . . ] · RDS text message is not available. TM Select another RDS station. pg 01-26/C55/22-Eng new 25 3/6/00, 11:43 AM 3139 116 19551 TROUBLESHOOTING Tape Deck Operation Recording or playback cannot be made or there is a decrease in audio level. · Dirty tape heads, capstans or pressure rollers. TM See section on tape deck maintenance (page 25). [. . . ]