Bruker manual HOTPOINT AQ93F 69 EU

[. . . ] DELAYED START button: press to set a delayed start for the selected wash cycle; the set delay time will appear on the display above (see “Running a wash cycle”). [. . . ] This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be washed at 60°C. This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be washed at 40°C. For all Test Institutes: 2) Long wash cycle for cottons: set wash cycle 4) Long wash cycle for synthetics: set wash cycle with a temperature of 40°C. 9 Detergents and laundry EN Detergent The type and quantity of detergent required depend on the type of fabric you are washing (cotton, wool, silk, etc. €¢ use liquid detergents for delicate cotton garments and for all low-temperature wash cycles. Use powder detergent for white cotton garments, for pre-washing, and for washing at temperatures over 60°C ! [. . . ] Note: to exit “Demo mode”, switch machine off, then press and hold the two “START/PAUSE” simultaneously for 3 seconds. [. . . ]