Bruker manual HOTPOINT 7HKRC 640 B RU/HA

[. . . ] To open the terminal board, use a screwdriver as a lever under the side tabs of the cover (see Terminal board picture). [. . . ] To deactivate this function, press and hold – for at least 2 seconds - the selector button corresponding to function has been the cooking zone on which the activated; alternatively, select a different power level using the buttons - + and button or automatic 5. Using multiple programmes and the display If one or more hotplates are programmed, the display will show the data for the hotplate with the least time remaining, and the light corresponding to the position of the hotplate will flash. To visualise the time remaining for the other programmed button repeatedly: the time hotplates, press the remaining for each hotplate will be shown sequentially in a clockwise order, starting from the front left hotplate. And buttons • Press and hold the simultaneously for 6 seconds. This indicator signals which cooking zones are still at a high temperature. Safety switch The appliance has a safety switch which automatically switches the cooking zones off after they have been in operation for a certain amount of time at a particular power level. [. . . ] Stainless steel frame (only in models with outer frame) Stainless steel can be marked by hard water which has been left on the surface for a long time, or by cleaning products containing phosphorus. [. . . ]